The HP ZBook Firefly 14 G10 is an ultraportable mobile workstation built for professionals who need ISV-certified performance without the weight. Powered by 13th Gen Intel Core processors and NVIDIA RTX A500 graphics, it’s a full workstation that fits in a messenger bag. This compatibility guide covers RAM, SSD, charger, and docking upgrades for the Firefly 14 G10.
RAM Compatibility
The Firefly 14 G10 has 2 DDR5 SO-DIMM slots, meaning you can upgrade both the factory-installed RAM modules. The system supports up to 64GB total (2x32GB DDR5-5200), though most configurations ship with 16GB or 32GB standard.
| Specification | Details |
|---|---|
| Slot Count | 2x DDR5 SO-DIMM |
| Max Capacity | 64GB (2x32GB) |
| Speed | DDR5-5200 MHz |
| Voltage | 1.1V |
| Form Factor | SO-DIMM 260-pin |
To upgrade, remove the access panel on the underside of the laptop (typically 4–6 screws), push the retention clips outward on each slot, and pull the old module at a 45-degree angle. Insert the new DDR5 module at 45 degrees and press down until the clips snap. Any DDR5-5200 SO-DIMM rated for laptop use will work. Kingston FURY Impact, Corsair Vengeance, and Crucial Ballistix are common compatible options. See our DDR5 SO-DIMM RAM hub for specific model recommendations.
SSD Compatibility
The Firefly 14 G10 has 1x M.2 2280 NVMe slot supporting PCIe Gen 4. The factory drive is typically a 512GB or 1TB Samsung PM991A or Kioxia BG5. You can replace it with any M.2 2280 PCIe 4.0 NVMe drive up to 2TB or 4TB.
| Specification | Details |
|---|---|
| Slot Count | 1x M.2 2280 |
| Max Capacity | 4TB |
| Interface | NVMe PCIe 4.0 |
| Form Factor | 2280 (22mm width, 80mm length) |
| Thermal Pads | Required (included with most SSDs) |
To replace the SSD, shut down the laptop, remove the access panel, locate the M.2 slot (usually marked on the motherboard), and pull out the small Phillips screw holding the drive at a 30-degree angle. Pull the old drive diagonally and insert the new one at the same angle until it clicks. Tighten the screw. Buy NVMe SSDs on Amazon — Samsung 990 EVO, SK Hynix P41 Platinum, and WD Black SN850X are popular choices for workstations.
Charger Compatibility
The Firefly 14 G10 ships with a 65W USB-C Power Delivery charger. It also supports charging via the Thunderbolt 4 port with any 65W+ USB-C PD charger. For better travel flexibility, a 100W USB-C PD charger provides faster charging on other devices in your bag.
| Charger Type | Wattage | Connector | Notes |
|---|---|---|---|
| HP OEM Charger | 65W | USB-C | Compact, optimized for Firefly 14 |
| Third-party USB-C PD | 65W–100W | USB-C | Any PD charger 65W+ works. 100W faster charging. |
| Anker, Belkin, or Lenovo | 65W–140W | USB-C | Popular alternatives. Charge while using Thunderbolt dock. |
The Firefly 14 G10 does NOT have a barrel connector — USB-C PD is the only charging method. This makes it very travel-friendly since you can use the same charger for your phone and tablet. Browse 65W USB-C chargers on Amazon.
Dock & Thunderbolt 4 Compatibility
The Firefly 14 G10 has 2x Thunderbolt 4 ports (both USB-C shape). Any Thunderbolt 4 dock or USB-C dock with high power delivery (65W+) will work. Popular options include:
- HP Thunderbolt Dock G3 — 120W charging, 2x display support via DisplayPort
- Lenovo Thunderbolt 3 Dock Ultra — Cross-compatible with TB4, 100W charging
- CalDigit Thunderbolt 3 Dock Pro — Premium option, 85W charging, multiple DisplayPort outputs
- Simple USB-C hubs — Anker, Belkin USB-C hubs with HDMI/USB-A pass-through and 65W PD pass-through work fine for basic setups
Since the Firefly 14 uses USB-C PD charging (not barrel connector), ensure any dock you choose supports 65W minimum pass-through charging so you can charge the laptop while docked.
Full Specifications Table
| Component | Specification | Max Upgrade |
|---|---|---|
| Processor | 13th Gen Intel Core i5/i7 (Raptor Lake) | N/A (soldered) |
| RAM | 2x DDR5 SO-DIMM, 5200 MHz | 64GB (2x32GB) |
| Storage | 1x M.2 2280 NVMe PCIe Gen 4 | 4TB |
| Display | 14″ FHD (1920×1200) or WUXGA (1920×1440) | N/A (non-upgradeable) |
| GPU | NVIDIA RTX A500 (4GB GDDR6) | N/A (soldered) |
| Ports | 2x Thunderbolt 4, 2x USB-A, 1x HDMI, 1x 3.5mm audio jack | Add docks via Thunderbolt 4 |
| Charging | USB-C Power Delivery 65W | 65W–100W USB-C PD charger |
| Weight | ~1.58 kg (3.48 lbs) | N/A |
Frequently Asked Questions
Can I upgrade the CPU or GPU?
No. Both the 13th Gen Intel Core processor and NVIDIA RTX A500 GPU are soldered directly to the motherboard and cannot be replaced. Your upgrade options are limited to RAM and SSD only.
What’s the difference between FHD and WUXGA displays?
FHD is 1920×1200 resolution (standard 16:10 widescreen), while WUXGA is 1920×1440 (taller aspect ratio, more vertical screen real estate). WUXGA is better for CAD and spreadsheets. Both are matte anti-glare, ideal for outdoor work and reducing blue light strain. Display is non-upgradeable.
Does this laptop work with HP Elite Docks?
The Firefly 14 G10 does not have a traditional dock connector. It charges and connects peripherals exclusively via Thunderbolt 4 USB-C ports. You’ll need a Thunderbolt or USB-C dock, not older Elite Dock G2/G3 models. However, simple USB-C hubs are more affordable and often sufficient.
Can I charge this laptop with a 100W USB-C charger?
Yes. The Firefly 14 G10 has a 65W charger standard, but it will accept and benefit from any USB-C PD charger rated 65W or higher. A 100W charger will charge slightly faster and also charge your phone/tablet. Just ensure the charger supports USB-C Power Delivery (not Qualcomm Quick Charge alone).
Is the RTX A500 enough for video editing?
The RTX A500 is entry-level for professional work (4GB GDDR6). It handles 1080p multi-track video editing in Premiere Pro or DaVinci Resolve. For 4K timelines with heavy effects, consider the larger ZBook Fury 16 G10 with RTX 3500 or RTX 4000 GPU. For CAD and 3D modelling, the A500 is adequate for mechanical design but may struggle with dense photorealistic renderings.
Recommended Products
These are the products we recommend based on this guide. All links go to Amazon UK where you can check current prices and availability.
| Product | Why We Recommend It | Amazon UK |
|---|---|---|
| Corsair Vengeance DDR4 SO-DIMM 32GB (2×16GB) 3200MHz | Best overall DDR4 upgrade kit | View on Amazon UK |
| Kingston Fury Impact DDR4 SO-DIMM 32GB (2×16GB) 3200MHz | Reliable alternative with tight latency | View on Amazon UK |
| Corsair Vengeance DDR5 SO-DIMM 32GB (2×16GB) 5600MHz | Top-rated DDR5 kit for gaming & productivity | View on Amazon UK |
| Kingston Fury Impact DDR5 SO-DIMM 32GB (2×16GB) 5600MHz | Excellent DDR5 alternative with XMP support | View on Amazon UK |
| Samsung 990 Pro 2TB NVMe M.2 2280 | Fastest consumer NVMe — ideal for gaming & editing | View on Amazon UK |
| WD Black SN850X 2TB NVMe | Excellent Gen4 speed with heatsink option | View on Amazon UK |
| Crucial P5 Plus 1TB NVMe | Great value Gen4 SSD | View on Amazon UK |
| Kingston NV2 1TB NVMe | Budget-friendly with solid reliability | View on Amazon UK |
Prices and availability may vary. As an Amazon Associate, we earn from qualifying purchases.
