The ProDesk 600 G4 is a 8th Gen Intel (Coffee Lake) business desktop released in 2018. This guide covers RAM compatibility (DDR4-2666), SSD upgrade options, and recommended components for maximum performance.
Available in SFF (Small Form Factor) and Tower variants, the ProDesk 600 G4 supports up to 64GB of DDR4-2666 RAM in the Tower configuration and 32GB in the SFF.
ProDesk 600 G4 Quick Specifications
| Specification | SFF | Tower |
|---|---|---|
| Processor | 8th Gen Intel (Coffee Lake) | |
| RAM Type | DDR4-2666 | |
| RAM Slots | 2 | 4 |
| Max RAM | 32GB | 64GB |
| Storage | M.2 SATA + 2.5″ SATA | |
| NVMe Support | No (SATA only) | |
| PCIe Generation | 3.0 | |
ProDesk 600 G4 RAM Upgrade Guide
Compatible RAM Specifications
The ProDesk 600 G4 requires DDR4-2666 unbuffered DIMMs (UDIMMs). Use non-ECC desktop DIMMs for standard configurations.
Recommended RAM Configurations
| Configuration | Form Factor | Total RAM | Modules |
|---|---|---|---|
| Budget | SFF/Tower | 16GB | 2 × 8GB |
| Standard | SFF | 32GB | 2 × 16GB |
| Standard | Tower | 32GB | 2 × 16GB |
| Maximum (Tower) | Tower | 64GB | 4 × 16GB |
RAM Installation Steps
- Shut down the computer and disconnect all cables including the power cord
- Press the power button for 5 seconds to discharge residual electricity
- Remove the side panel (SFF: slide release latch; Tower: remove thumbscrews)
- Locate the DIMM slots on the motherboard
- Open the retention clips on both sides of the slot
- Align the notch on the RAM module with the key in the slot
- Press down firmly and evenly until the retention clips snap into place
- Replace the side panel and reconnect cables
- Power on and verify RAM is recognised in BIOS (press F10 during startup)
ProDesk 600 G4 SSD Upgrade Guide
The ProDesk 600 G4 supports 2.5″ SATA SSDs and 3.5″ SATA hard drives. This generation does not support M.2 NVMe drives natively. A SATA SSD upgrade is the most impactful performance improvement you can make.
SATA SSD Installation
- Power off and open the chassis as described above
- Locate the 2.5″ or 3.5″ drive bay
- Mount the SSD using the drive caddy or bracket (SFF models may need a 2.5″ adapter)
- Connect the SATA data cable and SATA power cable
- Reassemble and boot — initialise the drive in Disk Management if it is a secondary drive
Recommended Upgrade Products
| Product | Type | Best For | Link |
|---|---|---|---|
| Crucial 16GB DDR4-2666 UDIMM | RAM | 16GB stick | Shop |
| Kingston Fury Beast 16GB DDR4-2666 | RAM | 16GB stick | Shop |
| Corsair Vengeance LPX 32GB DDR4-2666 Kit | RAM | 32GB kit (2×16GB) | Shop |
| Samsung 870 EVO 1TB SATA | SSD | SATA upgrade | Shop |
| Crucial MX500 1TB SATA | SSD | Budget SATA | Shop |
Prices and availability may vary. As an Amazon Associate, we earn from qualifying purchases.
Frequently Asked Questions
Q: What type of RAM does the ProDesk 600 G4 use?
A: The ProDesk 600 G4 uses DDR4-2666 unbuffered DIMMs (UDIMMs). The SFF model has 2 DIMM slots supporting up to 32GB, while the Tower model has 4 slots supporting up to 64GB.
Q: Can I add an NVMe SSD to the ProDesk 600 G4?
A: No, the ProDesk 600 G4 does not have a native M.2 NVMe slot. You can upgrade to a 2.5 inch SATA SSD for a significant performance improvement over a traditional hard drive.
Q: Is the ProDesk 600 G4 RAM compatible with the ProDesk 600 series?
A: RAM compatibility depends on the specific generation. The ProDesk 600 G4 uses DDR4-2666, which is physically compatible with other DDR4 systems but the speed rating must match or exceed the motherboard’s requirement.
Q: How do I check how much RAM is currently installed?
A: Open Task Manager (Ctrl+Shift+Esc), click the Performance tab, then select Memory. This shows total installed RAM, speed, form factor, and how many slots are in use. Alternatively, press Win+Pause/Break to open System Information.
Q: Can I mix different RAM sizes in the ProDesk 600 G4?
A: While the ProDesk 600 G4 can technically run with mismatched RAM sizes, it is recommended to use identical modules in pairs for optimal dual-channel performance. Mixing sizes will cause the system to run in flex mode, which reduces memory bandwidth.
Related HP Upgrade Guides
- HP Z2 G9 SFF RAM & SSD Upgrade Guide (2023)
- HP EliteDesk 800 G9 Mini RAM & SSD Upgrade Guide (2023)
- HP EliteDesk 800 G9 SFF RAM & SSD Upgrade Guide (2023)
- HP EliteDesk 800 G9 Tower RAM & SSD Upgrade Guide (2023)
- HP Pro Tower 400 G9 RAM & SSD Upgrade Guide (2023)
- HP Upgrade Guide
Not sure what fits? Use our free Compatibility Checker covering 3,195+ models.
Helpful Guides
Recommended SATA SSDs
Western Digital
Western Digital Red WD ™ SA500 SATA SSD M.2 2280 POWERED BY SANDISK 50
£238.32
View Deal
