desktop featured image

HP ProDesk 600 G5 Upgrade Guide (2026) — RAM, SSD & Compatibility

The ProDesk 600 G5 is a 9th Gen Intel business desktop released in 2019. This guide covers RAM compatibility (DDR4-2666), SSD upgrade options including NVMe, and recommended components for maximum performance.

Available in SFF (Small Form Factor) and Tower variants, the ProDesk 600 G5 supports up to 64GB of DDR4-2666 RAM in the Tower configuration and 32GB in the SFF.


ProDesk 600 G5 Quick Specifications

Desktop motherboard overhead view
Desktop motherboard overhead view
SpecificationSFFTower
Processor9th Gen Intel
RAM TypeDDR4-2666
RAM Slots24
Max RAM32GB64GB
StorageM.2 NVMe + 2.5″ SATA
NVMe SupportYes
PCIe Generation3.0

ProDesk 600 G5 RAM Upgrade Guide

Compatible RAM Specifications

The ProDesk 600 G5 requires DDR4-2666 unbuffered DIMMs (UDIMMs). Use non-ECC desktop DIMMs for standard configurations.

Recommended RAM Configurations

ConfigurationForm FactorTotal RAMModules
BudgetSFF/Tower16GB2 × 8GB
StandardSFF32GB2 × 16GB
StandardTower32GB2 × 16GB
Maximum (Tower)Tower64GB4 × 16GB

RAM Installation Steps

  1. Shut down the computer and disconnect all cables including the power cord
  2. Press the power button for 5 seconds to discharge residual electricity
  3. Remove the side panel (SFF: slide release latch; Tower: remove thumbscrews)
  4. Locate the DIMM slots on the motherboard
  5. Open the retention clips on both sides of the slot
  6. Align the notch on the RAM module with the key in the slot
  7. Press down firmly and evenly until the retention clips snap into place
  8. Replace the side panel and reconnect cables
  9. Power on and verify RAM is recognised in BIOS (press F10 during startup)

ProDesk 600 G5 SSD Upgrade Guide

The ProDesk 600 G5 supports M.2 NVMe drives via PCIe 3.0 as well as standard 2.5″ SATA SSDs. NVMe drives offer significantly faster read/write speeds compared to SATA.

M.2 NVMe Installation

  1. Power off and open the chassis as described above
  2. Locate the M.2 slot on the motherboard (typically near the CPU or front panel connectors)
  3. Remove the M.2 mounting screw
  4. Insert the M.2 drive at a 30-degree angle into the slot
  5. Press down and secure with the mounting screw
  6. Reassemble and boot — the drive should appear in BIOS automatically

Recommended Upgrade Products

ProductTypeBest ForLink
Crucial 16GB DDR4-2666 UDIMMRAM16GB stickShop
Kingston Fury Beast 16GB DDR4-2666RAM16GB stickShop
Corsair Vengeance LPX 32GB DDR4-2666 KitRAM32GB kit (2×16GB)Shop
Samsung 970 EVO Plus 1TB NVMeSSDHigh performanceShop
WD Blue SN570 1TB NVMeSSDGreat valueShop
Crucial P3 Plus 1TB NVMeSSDBudget NVMeShop
Samsung 870 EVO 1TB SATASSDSATA upgradeShop
Crucial MX500 1TB SATASSDBudget SATAShop

Prices and availability may vary. As an Amazon Associate, we earn from qualifying purchases.


Frequently Asked Questions

Q: What type of RAM does the ProDesk 600 G5 use?

A: The ProDesk 600 G5 uses DDR4-2666 unbuffered DIMMs (UDIMMs). The SFF model has 2 DIMM slots supporting up to 32GB, while the Tower model has 4 slots supporting up to 64GB.

Q: Can I add an NVMe SSD to the ProDesk 600 G5?

A: Yes, the ProDesk 600 G5 supports M.2 NVMe drives via PCIe 3.0. This is the recommended upgrade for maximum storage performance.

Q: Is the ProDesk 600 G5 RAM compatible with the ProDesk 600 series?

A: RAM compatibility depends on the specific generation. The ProDesk 600 G5 uses DDR4-2666, which is physically compatible with other DDR4 systems but the speed rating must match or exceed the motherboard’s requirement.

Q: How do I check how much RAM is currently installed?

A: Open Task Manager (Ctrl+Shift+Esc), click the Performance tab, then select Memory. This shows total installed RAM, speed, form factor, and how many slots are in use. Alternatively, press Win+Pause/Break to open System Information.

Q: Can I mix different RAM sizes in the ProDesk 600 G5?

A: While the ProDesk 600 G5 can technically run with mismatched RAM sizes, it is recommended to use identical modules in pairs for optimal dual-channel performance. Mixing sizes will cause the system to run in flex mode, which reduces memory bandwidth.


Related HP Upgrade Guides

Not sure what fits? Use our free Compatibility Checker covering 3,195+ models.

Helpful Guides


💰 Compare PricesShop around for the best deal on HP desktop upgrades
Affiliate disclosure: We may earn a commission from purchases made through these links at no extra cost to you.

Recommended NVMe SSDs

HP L25983-001 internal solid state drive 256 GB M.2 PCI Express NVMe

HP

HP L25983-001 internal solid state drive 256 GB M.2 PCI Express NVMe

£96.22

View Deal
Western Digital Green WD ™ SN3000 NVMe™ SSD POWERED BY SANDISK 2 TB

Western Digital

Western Digital Green WD ™ SN3000 NVMe™ SSD POWERED BY SANDISK 2 TB

£145.16

View Deal
Western Digital Blue SN5000 500 GB M.2 PCI Express 4.0 NVMe 3D TLC NAN

Western Digital

Western Digital Blue SN5000 500 GB M.2 PCI Express 4.0 NVMe 3D TLC NAN

£159.42

View Deal
Origin Storage Inception SSD 256GB NVMe M.2 3D TLC 80mm

Origin Storage

Origin Storage Inception SSD 256GB NVMe M.2 3D TLC 80mm

£73.21

View Deal
Kingston Technology 4096G KC3000 M.2 2280 NVMe SSD

Kingston Technology

Kingston Technology 4096G KC3000 M.2 2280 NVMe SSD

£742.84

View Deal
Origin Storage Inception SSD 256GB NVMe M.2 3D TLC 80mm

Origin Storage

Origin Storage Inception SSD 256GB NVMe M.2 3D TLC 80mm

£102.20

View Deal

Leave a Comment

Your email address will not be published. Required fields are marked *

Not sure what fits? Check your exact model Use the Compatibility Checker →